Hello All,

I was trying to find a list of the configuration files which can be copied from one software release to the next to save a person from having to re-enter settings for their equipment, such as User Buttons, screen selection, etc., particularly for KMotionCNC.

Could I bother someone to let me know which files can be carried forward without causing problems within a new version release?

Thanks a bunch,
David.

David
you need to dopy files in the data folder
you will find it here,
Kmotion 4**/Kmotion/data
I usually copy the folder to desktop,rename to something like "dataDec22" then after the new install I open it and copy all files into the new data folder,,overwrite all.
hope that helps
Carl

--- In DynoMotion@yahoogroups.com, "daveymahomh600e" <david.m.stevenson@...> wrote:
>
> Hello All,
>
> I was trying to find a list of the configuration files which can be copied from one software release to the next to save a person from having to re-enter settings for their equipment, such as User Buttons, screen selection, etc., particularly for KMotionCNC.
>
> Could I bother someone to let me know which files can be carried forward without causing problems within a new version release?
>
> Thanks a bunch,
> David.
>

Group: DynoMotion	Message: 6310	From: Tom Kerekes	Date: 12/22/2012
Subject: Re: New Release Files

Hi David, Copying the directory often works or gets the settings close, But sometimes between versions when new parameters are added the format of the file changes and the new Version won't read the old file properly.  In that case you may need to add the new line(s) into the old file.  We discussed this here: http://tech.groups.yahoo.com/group/DynoMotion/message/6276 Regards TK Group: DynoMotion Message: 6314 From: carlcnc Date: 12/22/2012 Subject: Re: New Release Files Tom at least I am consistent, always " half right " ! well most of the time anyway lol CArl --- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote: > > Hi David, > > Copying the directory often works or gets the settings close, But sometimes between versions when new parameters are added the format of the file changes and the new Version won't read the old file properly.  In that case you may need to add the new line(s) into the old file.  We discussed this here: > > http://tech.groups.yahoo.com/group/DynoMotion/message/6276 > > > Regards > TK > > > > ________________________________ > From: David Stevenson <david.m.stevenson@...> > To: DynoMotion@yahoogroups.com > Sent: Saturday, December 22, 2012 8:31 AM > Subject: RE: [DynoMotion] Re: New Release Files > > >   > That helps > a lot. Thank you Carl. >   > David >   > Group: DynoMotion Message: 6315 From: daveymahomh600e Date: 12/22/2012 Subject: Re: New Release Files Thanks for your help Fellows. David --- In DynoMotion@yahoogroups.com, "carlcnc" <carlcnc@...> wrote: > > > Tom > at least I am consistent, > always " half right " ! well most of the time anyway lol > > CArl > --- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@> wrote: > > > > Hi David, > > > > Copying the directory often works or gets the settings close, But sometimes between versions when new parameters are added the format of the file changes and the new Version won't read the old file properly.  In that case you may need to add the new line(s) into the old file.  We discussed this here: > > > > http://tech.groups.yahoo.com/group/DynoMotion/message/6276 > > > > > > Regards > > TK > > > > > > > > ________________________________ > > From: David Stevenson <david.m.stevenson@> > > To: DynoMotion@yahoogroups.com > > Sent: Saturday, December 22, 2012 8:31 AM > > Subject: RE: [DynoMotion] Re: New Release Files > > > > > >   > > That helps > > a lot. Thank you Carl. > >   > > David > >   > >